Goat Keratan Sulfate Proteoglycans Protein, CF

Catalog #: 8618-KS Datasheet / COA / SDS

Isolated from goat cornea

Catalog #	Availability	Size / Price	Qty
8618-KS-010

All Keratan Sulfate Proteoglycans Proteins and Enzymes

Product Details

Reviews

Summary Product Datasheets Carrier Free Reconstitution Calculator Background Related Research Areas

Goat Keratan Sulfate Proteoglycans Protein, CF Summary

Product Specifications

Purity

>90%, by SDS-PAGE with silver staining.

Endotoxin Level

<1.0 EU per 1 μg of the protein by the LAL method.

Activity

Measured by its ability to act as a substrate for Recombinant F. keratolyticus Endo-beta-galactosidase. >90% of Keratan Sulfate Proteoglycans can be cleaved under the described conditions.

Source

Goat cornea-derived Keratan Sulfate Proteoglycans protein

SDS-PAGE

30-300 kDa, reducing conditions

Product Datasheets

8618-KS

Product Datasheet

COA

SDS

Carrier Free

What does CF mean?

CF stands for Carrier Free (CF). We typically add Bovine Serum Albumin (BSA) as a carrier protein to our recombinant proteins. Adding a carrier protein enhances protein stability, increases shelf-life, and allows the recombinant protein to be stored at a more dilute concentration. The carrier free version does not contain BSA.

What formulation is right for me?

In general, we advise purchasing the recombinant protein with BSA for use in cell or tissue culture, or as an ELISA standard. In contrast, the carrier free protein is recommended for applications, in which the presence of BSA could interfere.

8618-KS

Formulation	Supplied as a 0.2 μm filtered solution in deionized water.
Shipping	The product is shipped with polar packs. Upon receipt, store it immediately at the temperature recommended below.
Stability & Storage:	Use a manual defrost freezer and avoid repeated freeze-thaw cycles. 6 months from date of receipt, -20 to -70 °C as supplied. 3 months, -20 to -70 °C under sterile conditions after opening.

Assay Procedure

Materials

Labeling Buffer: 25 mM MES, 0.5% (v/v) Triton® X-100, 2.5 mM MgCl₂, 2.5 mM MnCl₂, 1.25 mM CaCl₂, 0.75 mg/mL BSA, pH 7.0
Assay Buffer: 0.1 M MES, pH 6.0
Gel Running Buffer: 40 mM Tris, 1 mM EDTA, adjust to pH 8.0 with acetic acid
Recombinant F. keratoyticus Endo-beta -Galactosidase (rF.k. Endo-beta -galactosidase) (Catalog # 8620-GH)
Goat Keratan Sulfate Proteoglycans (Catalog # 8618-KS)
Recombinant Human Carbohydrate Sulfotransferase 1/CHST1 (rhCHST-1) (Catalog # 5316-ST)
8% SDS-PAGE (approximately 15 cm x 20 cm, 20 lanes per gel
PAP³⁵S (prepared in-house using the PAPS Synthesis Kit (Catalog # EA005), ~1 μM = ~2 x 106 cpm/μL)
Gel loading buffer: 0.15 M Tris, 20.8 mM SDS, 1.15 M Glycine, 174 µM Bromophenol Blue, 30% Glycerol
Blotting paper (Fisher Scientific, Catalog # 05-714-4)
Gel dryer
Glogos® II autorad markers (Stratagene, Catalog # 420202) or equivalent
Blue sensitive medical X-ray film
X-ray film cassette
Film developer (Konica SRX-101A Medical Film Processor) or equivalent
Liquid scintillation counter (Beckman Coulter, Model # LS5000TD) or equivalent
Liquid scintillation fluid (Beckman Coulter, Catalog # 141349) or equivalent

Create Radiolabeled Keratan Sulfate Mixture containing 0.1 mg/mL Keratan Sulfate, 12 μg/mL rhCHST-1, and 0.025 μM PAP³⁵S in Labeling Buffer.
Incubate Keratan Sulfate Mixture at 37 °C for 1.5 hours.
Dilute incubated Keratan Sulfate Mixture 3 fold in Assay Buffer.
Dilute rF.k. Endo-beta -galactosidase to 1.334 µg/mL in Assay Buffer.
Combine 15 µL of 1.334 µg/mL rF.k. Endo-beta -galactosidase with 15 µL diluted Keratan Sulfate Mixture. Include a control containing 15 µL Assay Buffer and 15 µL Keratan Sulfate Mixture.
Incubate reactions and control at 37 °C for 20 minutes.
Add 15 µL gel loading buffer to each reaction and control. Mix.
Load 30 µL of each sample per lane on a gel. Leave empty lanes between samples.
Run at 200 V for 30 minutes.
Transfer gel onto blotting paper and dry with gel dryer for 1 hour or until fully dry.
Affix two autorad markers to the blotting paper next to the dried gel.
In a darkroom expose dried gel to X-ray film by enclosing overnight in a cassette. Develop the following day.
Using the dried gel, begin marking regions to be cut out for scintillation counting.
Mark a horizontal line across the top of the entire gel just under the bottom of the wells.
Using the developed film as an overlay, mark a second line just below the lower edge of the labeled Keratan Sulfate for each well.
Draw a third line just below where the labeled product migrated (ignore any free sulfate, appearing equivalent in all lanes, and migrating the furthest). For the control, identify the empty region where the product would appear.
The area between the first two lines contains the labeled starting material. The area between the second two lines contains the compact cleavage product resulting from the reaction.
Mark vertical lines distinguishing one lane (reaction condition) from another.
Cut each region (two per lane) and place each into a separate liquid scintillation vial. Add 5 mL of liquid scintillation fluid to each vial and count vials for ³⁵S.
Calculate % cleavage for each reaction.

Per Reaction:

Keratan Sulfate: 0.5 μg
rF.k. Endo-beta -galactosidase: 20 ng

Reconstitution Calculator

Background: Keratan Sulfate Proteoglycans

Keratan sulfate (KS) is a special glycosaminoglycan (GAG) found in cornea, cartilage and bone (1). GAGs are a group of linear polysaccharides with different repeating disaccharide units. Other GAGs include heparin, heparan sulfate (HS), chondroitin sulfate (CS), dermatan sulfate (DS), and hyaluronan (HA). Proteoglycans refer to GAG-protein conjugates. Known KS proteoglycans include lumican, keratocan, mimecan, aggrecan and fibromodulin. They have been identified in numerous epithelial and neural tissues in which KS expression responds to embryonic development, physiological variations, and wound healing (1). KS was first identified in 1939 by Suzuki in extracts of cornea (2), and later by Karl Meyer (3). The basic repeating disaccharide unit within KS is -3Gal beta 1-4GlcNAc beta 1 and are polymerized by B4GALT (4) and B3GNT families of glycosyltransferase (5). KS chains are subsequently sulfated by two specific sulfotransferases, CHST1 and CHST6, at a region close to its non-reducing end (6). KS is linked to core proteins either through O-glycan or N-glycan and corneal KS is mostly N-linked glycan (7). This product was purified from cornea of goat eyes through chemical extraction with 4M guanidine-HCl and further purified with anion-exchange chromatography steps. The identity of KS was confirmed by radioisotope ³⁵S labeling with KS specific sulfotransferases, CHST1 and CHST6, followed by Recombinant F. keratolyticus Endo-beta-Galactosidase digestion, which also suggested that KS accounts for majority of the mass of this product.

References